1.25oz (4inch) Epoxy Jig (In-Line Hook)

The Epoxy Jig is your precision casting tool for pressured, finicky, or micro-feeding fish. It lands soft, hovers long, refracts light naturally, and buys you the extra seconds in the strike zone that convert follows into eats. It’s the scalpel in the casting jig system — and for albies and striped bass, it’s the lure that unlocks the bites nothing else can get. The 7/8oz is the workhorse. Carry a progression for conditions. Fish it when calm water, micro bait, or spooky fish demand finesse.

• Semi-Buoyant Resin Body:

This is what makes the Epoxy a different animal. The resin body weighs less than lead or zinc metals, which translates directly into finesse. It buys you time in the column, softens the splash on entry, and lets you manipulate retrieve speed and cadence without overpowering the bait. The balance between weight and buoyancy creates a presentation that looks alive and non-threatening — exactly what pressured fish demand.

• Double-Thick Translucent Epoxy Coat:

The signature finish. A vivid scale core is encased in a double-thick translucent epoxy layer that refracts light naturally rather than reflecting it harshly like bare metal. The result is a shimmer that changes with angle and depth — the same way a live baitfish looks in the water. The epoxy is virtually indestructible: it handles bluefish teeth, rocky bottoms, and repeated casting abuse without chipping or losing its visual appeal.

• Light Weight-to-Length Ratio:

The EPO’s defining engineering characteristic. At any given length, the Epoxy weighs less than a metal jig of the same size. That lighter profile means a slower fall, a longer hover in the strike zone, and a softer landing on the cast. It’s the ratio that gives the EPO its unique ability to cast like a metal but fish like something much more subtle.

• Through-Wired Construction:

A continuous wire runs through the body from the line tie to the hook connection. No weak points. When a 20lb striper or a hot albie hits mid-retrieve, the through-wire construction transfers the load directly to the hook with zero failure risk. This is the foundation of the jig’s durability under real fishing pressure.

• Reflective Scale Finish with Laser Eye:

The scale pattern beneath the epoxy coat creates a realistic baitfish profile at every angle. The imitative laser eye adds a target point that predators key on. Combined with the translucent epoxy, the visual package is one of the most lifelike profiles in any casting jig on the market.

• Inline Single Hook Option:

Available with VMC inline single or VMC 4X treble. The inline single tracks cleaner, hooks deeper, releases faster, and causes less damage to fish — critical for albies (nearly all released) and stripers (most released by regulation). Inline singles are the recommended configuration and are transitioning to the default across all Hogy casting jigs.

The Epoxy Jig responds to everything from a dead-still hover to a fast, erratic skip. Retrieve selection depends on what the fish are doing, not what you’re used to throwing. Here’s the framework.

• Surface Blitzes (Albies, Bonito, Stripers on Bait)

- Fish crashing bait on top. The most exciting and demanding casting scenario.

- Skippy Retrieve (Default for Blitzes)

- Rod high (10–11 o’clock), twitch the tip continuously while reeling fast. 2–3 cranks per second. Imitates bait skipping for its life. Use in bright light, choppy water, or aggressive feeds. This is the retrieve that defines albie fishing.

Reel-Reel-Pause: Rod at 9 o’clock. Three to four quick cranks, then pause 1–2 seconds. The pause triggers strikes from fish tracking the jig. Deadly when albies are following but not fully committing.

Steady Wobble: Rod mid-level. Straight retrieve, no rod movement. 1–2 cranks per second. Use to locate scattered fish or when visibility is limited. The simplest retrieve — let the EPO’s natural action do the work.

• Current Seams and Rip Edges:

- Fish holding in ambush positions where current funnels bait.

- Fish the Swing

- Let the current sweep the EPO through the seam. Add occasional rod pops or slow cranks to keep it animated. Works like a drifted baitfish caught in the tide. Deadly on channel edges, tide lines, and rip margins.

Dead Drift: No retrieve. Let the current carry the jig with minimal tension. Imitates stunned or dying bait drifting through the strike zone. The most passive retrieve — and sometimes the most effective for pressured stripers.

• Blind Casting (No Visible Fish):

- No birds, no breaking fish. Just water, structure, and time.
Escalation strategy: Start with Steady Wobble to search. Shift to Reel-Pause if you get follows. Escalate to Skippy for aggressive reaction bites. Vary cast angles and let the jig drop a second or two before starting the retrieve.

• Deeper Open Water (20–60’): Fish holding over shoals, edges, or suspended bait.

Kerplunk: Hard cast, let the jig sit for 20–30 seconds (sometimes up to a minute). Lift 12–24 inches with a sharp snap, let it fall on slack. Repeat. Most strikes come on the fall or after the initial sit. A wake-up call for inactive predators.

Slow and Low: Rod low and steady (8–9 o’clock). Smooth, continuous retrieve. One crank every two seconds. Keeps the jig just above the bottom. Great in cold water or when fish are lethargic.

• Shallow Water Jigging (<30’):

- Finesse jigging for sea bass, fluke, scup, and bottom-holding stripers.

Slow Pitch (Casting Jig Version): Smooth lift from 9 to 11 o’clock, then drop with slight slack. The EPO flutters on the fall with more hang time than a metal, giving fish longer to react. One crank per lift.

Pitch-Pause-Drag: Gentle rod lift of 12–18 inches, pause on the fall, then slow crank to glide the jig along the bottom before lifting again. Mimics small crabs and baitfish crawling and darting. Effective for fluke and sea bass.

• Environmental Factors (E):

- Greasy Calm: This is where EPOs shine. The ocean turns slick and glassy — you need a lure that won’t blow the zone. EPOs land soft, hover naturally, and show flash without creating panic.
Low Light: Subtle shimmer and flutter in first light or cloudy conditions. The combo of stealth and shine keeps them looking natural.

- Finicky Fish: When fish are fussy and keyed on tiny bait, the EPO matches the hatch without overpowering the presentation. Cast far, fish it like a fly.

- Light to Moderate Chop: EPOs still perform. Their hover and swim hold up just under the turbulence if you keep the retrieve smooth.

- Light Current: EPOs excel in current seams or just outside soft rips. They hang in the flow, pick up subtle water movement, and twitch clean without tumbling.

• Observational Factors (O):

- Finicky, Surface-Feeding Fish: Built for fish cruising up top but not committing to hard baits. Walk it, twitch it, or hover without pushing fish off the feed.

- Microbait Conditions: When fish are keyed on tiny stuff — rain bait, silversides, baby anchovies — the EPO gives you size, color, and movement accuracy.

- Light Sonar Marks / Suspended Fish: Cast uptide or crosswind and let the EPO settle into the zone with minimal movement. One light twitch can seal the deal.

- Sight Fishing: Cast close and soft. When chasing singles or small pods, you need something that lands like a feather and responds to subtle rod work.

• Structure + Approach (S + A):

- Shallow Flats: Fish high in the column, keep the bait in sight without spooking fish or snagging bottom.

- Open Beach (Close-In): When fish are within 40 yards, best mix of precision and finesse. Soft cast, little twitch, it just looks alive.
Boat (Spooky Fish): Stay back, make the cast count, give the fish a reason to eat without a loud presentation.

- Edge Rips / Tide Lines: Drift in clean and stay in the top third of the column where bait naturally funnels.

- Shallow Water (<50’): Cross over to vertical jigging for sea bass, fluke, and bottom stripers.